Metal Detector - Walk Through - WATCHMAN

Microprocessor technology in detection and control circuitry—includes 20 standard application programs.

• Overhead control unit: LCD, alarm light, LED bar graph and control touchpads—plus all wiring, connections and electronics—are integrated into a single overhead compartment to eliminate exposure of wires and the external control box.
• Uniform coverage from archway to floor.
• Greater sensitivity for detecting metal weapons—maximum of 200 distinct sensitivity levels.
• Continuous online report of operating status.
• Tamper proof settings through computerized access codes.
• Three levels of ankle-boost sensitivity.
• Self diagnostic program: complete and automatic.
• Noise reduction to prevent false alarms.
• Rugged, lightweight design for simple maintenance and easy portability.
• Easy assembly: designed with only four (4) pieces and eight (8) screws. Simple-to-follow instructions.
• Optional battery pack for use anywhere; provides up to 20 hours of backup.
• Limited 24-month warranty: parts and labor.

Temperatures
          Operating: -4° F (-20° C) to +140° F (60° C)
          Humidity to 95% non condensing
          Storage: -40° F (-40° C) to 158° F (70° C)

Power
          Fully automatic 100 to 240 VAC, 50 or 60 Hertz, 14 watts; no rewiring,
          switching or adjustments required. Power supply meets UL, CSA, TUV
          and VDE standards.

Weatherproofing / Foreign Object Protection Standards
          Meets IP 31, IEC Standard. "Degrees of Protection provided by Enclosures,"
          IEC 529.

Interference Suppression
          100% sensor coil Faraday shielding; special Garrett built-in circuitry
          for noise suppression and ignoring x-ray monitor horizontal sync.

Traffic Counter
          Built-in and resettable with current reading available on LCD panel.

Synchronization
          Multiple channels permit several CS 5000s and other Garrett detectors
          to operate simultaneously in close proximity.

Alarms
          Ready light indicates unit is operational; alarm lights and audible
          alarms are activated when the target amount of metal is detected;
          LED bar graph indicates amplitude of alarm signal.

Tamper-Proof
          Dual-level access codes required to set or change all sensitivity settings
          and detection programs; one level for use by supervisors in
          selecting programs and sensitivity and the other for initial set-up and
          overall control; non-resettable sequence code logs all changes made
          whenever sensitivity codes are accessed. An audible alarm reports
          unauthorized attempts at access.

Infrared Sensor
          Improves analysis of detection signal; increases throughput; helps
          eliminate "false alarms" and also provides accurate traffic counter.

Control Outputs
          Solid state switches (low voltage AC or DC) for operating external
          alarms and control devices.

Masking
          Programs designed to eliminate the problem of dissimilar targets
          canceling each other.

Construction
          Attractive scratch and mar-resistant laminate with resilient end caps;
          control panel and cross members made of heavy duty aluminum.

Warranty
        24 months, parts and labor