Metal Detector - Walk Through PRO

Multi-dimensional scanning indicates whether a metal target is located on the left, right or center of the archway.

• Uniform detection field eliminates "hot spots."
• 20 standard programs for security application versatility.
• Microprocessor technology in detection and control circuitry. Maximum of 200 distinct sensitivity levels.
• Overhead control unit: LCD, alarm light, LED bar graph and control touchpads—plus all wiring, connections and electronics—are integrated into a single external overhead control           box compartment to eliminate wire exposure.
• Tamper proof settings through computerized access codes.
• Three levels of ankle boost sensitivity.
• Self diagnostic program: complete and automatic.
• Multiple coil design to minimize false alarms.
• Rugged, lightweight design provides simple maintenance and easy portability.
• Easy assembly: designed with only four (4) pieces and eight (8) screws. Simple-to-follow instructions.
• Optional battery pack for use anywhere; provides up to 20 hours of backup.
• Limited 24-month warranty: parts and labor

Operating: -4° F (-20° C) to +122° F (50° C)
Humidity to 95% non condensing
Storage: -40° F (-40° C) to 158° F (70° C)

Power
          Fully automatic 100 to 240 VAC, 50 or 60 Hertz, 24 watts; no rewiring,
          switching or adjustments required.

Weatherproofing / Foreign Object Protection Standards
          Meets IP 31, IEC Standard. "Degrees of Protection provided by Enclosures,"
          IEC 529.

Interference Suppression
          100% sensor coil Faraday shielding; RFI interference reduced with
          hardware; special Garrett built-in circuitry for noise suppression and
          ignoring x-ray monitors. Physical interference minimized by coil design
          and circuitry.

Traffic Counter
          Built-in and resettable with current reading available on LCD panel.

Synchronization
          Multiple channels permit several MT 5500s and other Garrett detectors to
          operate simultaneously in close proximity.

Alarms
          Ready light indicates unit is operational; alarm lights and audible alarms
          are activated when the target amount of metal is detected; location of
          alarm lights on left and right side of display combined with variable tone
          indicates which side of the person the target is located.

Tamper-Proof
          Dual-level access codes required to set or change all sensitivity settings
          and detection programs; one level for use by supervisors in selecting
          programs and sensitivity and the other for initial set-up and overall control;
          non-resettable sequence code logs all changes made whenever sensitivity
          codes are accessed. An audible alarm reports unauthorized attempts
          at access.

Infrared Sensor
          Improves analysis of detection signal; increases throughput; helps
          eliminate "false alarms" and also provides accurate traffic counter.

Control Outputs
          Solid state switches (low voltage AC or DC) for operating external alarms
          and control devices.

Masking
          Programs designed to eliminate the problem of dissimilar targets canceling
          each other.

Construction
          Attractive scratch and mar-resistant laminate with resilient end caps;
          control panel and cross members made of heavy duty aluminum.

Warranty
          Limited 24 months, parts and labor.